Wanted
International
Stockist / Distributors
16mm Pot + DPDT Push-Pull Sw 23

Alpha Products Inc - 351 Irving Drive, Oxnard, CA 93030, USA - Tel: 805-981-8666 - Fax: 805-988-6555 - Contact Us

Corporate Website

Send Your Specs

Contact Us

Std. Tapers

Request for Quote

 

Taper

Value in Ohms

Part Number

300/RC046400

A

500K

300/RC046410

B

50K

Select Part Numbers from the table then click on the “Request a Quote” Button to send your requirements for Price and Delivery. If you need custom product please use the “Send your Specs” Button

Click to see drawing in pdf

Electrical Characterisics

Mechanical Characteristics

Resistance Values

50 KOhm & 500 KOhm +/- 20%

Total Rotational Angle

300 deg +/- 5 deg

Resistance Taper

A, B

Rotational Torque

20 ~ 200 gf/cm

Residual Resistance

20 Ohm max

Rotational Stop Strength

6 kgf/cm

Rated Power

Taper A: 0.1W, taper B: 0.2W

Switch Function

DPDT, push-pull

Operating Voltage

taper A = 150V AC
taper B = 200V AC

Switch Rating

0.3A @30V DC

Withstanding Voltage

300V AC for 1 minute

LIfe

10,000 cycles min

Disclaimer: Alpha Products, Inc. makes no warranties, expressed or implied, including warranties of merchant ability or fitness /suitability for a particular purpose or application. Under no circumstances shall Alpha Products, Inc. be liable for incidental, consequential, or other damages from alleged negligence, breach of warranty, strict liability, tort, contract, or any other theory, arising out of the use, non use, or handling of these products.
Alpha Products Inc. reserves the right to discontinue, modify, amend and / or change any product, specification or service at any time without any obligation of providing any notice.

 Site Created by: Tarola International / USA  Hosted by Tarola.Net - Copyright 2006-2014.
 Copying or
Duplicating,of any part of this website in any form without written permission form Alpha Products Inc. is strictly forbidden